Navien NPE240S2 199,900 btu/h Ultra High Efficiency Standard Condensing Tankless Water Heater

Features:
1/2 gas pipe capable up to 24′
Field convertible gas system
Ultra condensing efficiency
Dual stainless steel heat exchangers
Low NOx emissions (20ppm)
SCH 40, 2″ venting up to 75′
Cascading capable
EZNav multi-line control panel
Built-in HotButton control panel
Common vent up to 12 units

In Stock
Starting As Low As

$55/month

Call now to Book Your Assesment
Categories:

Plumbing, Tankless Water Heaters

  • Product Description
  • Additional Info
Capacity 194 gal
Coating White
End Connection NPT x NPT
End Connection 1 NPT
End Connection 2 NPT
Energy Star Compliant Yes
Height 22-3/10 in.
Lead Law Compliant Yes
Material Stainless Steel
MBH 199
Power Source Gas
Weight 72.97 lb
Application Residential; Commercial
Product Type Residential Tankless Water Heaters
Energy Factor 0.96
Fuel Type Liquid Propane Gas; Natural Gas

NPE-240S2 QuickFacts

Dimensions

43.9cm W x 69.6cm H x 33.5cm D (17.3″ W x 27.4″ H x 13.2″ D)

  • Front view of NPE-240S2 condensing tankless water heater
  • Overhead view of NPE-240S2 condensing tankless water heater
  • Bottom view of NPE-240S2 condensing tankless water heater
  • NPE-240S2 condensing tankless water heater diagram legend

Certification Summary

All NPE-2 models convertible NG ↔ LP Yes
CSA Yes
NSF (Standard 5) Yes
Low Lead (<0.25 percent) Yes
SCAQMD 1146.2 (NOx <20ppm) Yes
AHRI number 206368362
Energy Star certified Yes
ANCE NOM certified Yes

Efficiency Ratings

Uniform Energy Factor (UEF) 0.96
MAX l/m (37°C Rise) 5.8
Annual Energy Consumption (NG) 177.0 therms/year
Annual Energy Consumption (LP) 734.4 L (194 gal)
Natural Gas Estimated Cost $247
Propane Estimated Cost $599

*Based on U.S. DOE test procedures. Costs based on CA$1.40 per therm NG and CA$3.09 per gallon propane.

Temperature Rise

Temp Rise NPE-240S2 Flow
19.4°C (35°F) 42.4 l/m (11.2 GPM)
22.2°C (40°F) 37.1 l/m (9.8 GPM)
25°C (45°F) 32.9 l/m (8.7 GPM)
27.8°C (50°F) 29.5 l/m (7.8 GPM)
30.6°C (55°F) 26.9 l/m (7.1 GPM)
33.3°C (60°F) 24.6 l/m (6.5 GPM)
36.1°C (65°F) 22.7 l/m (6 GPM)
38.9°C (70°F) 21.2 l/m (5.6 GPM)
41.7°C (75°F) 19.7 l/m (5.2 GPM)
44.4°C (80°F) 18.5 l/m (4.9 GPM)
47.2°C (85°F) 17.4 l/m (4.6 GPM)
50°C (90°F) 16.7 l/m (4.4 GPM)
55.6°C (100°F) 14.8 l/m (3.9 GPM)
61.1°C (110°F) 13.6 l/m (3.6 GPM)
66.7°C (120°F) 12.5 l/m (3.3 GPM)
72.2°C (130°F) 11.4 l/m (3 GPM)
77.8°C (140°F) 10.6 l/m (2.8 GPM)

DHW Capacity

Natural gas 13,300 – 199,900 BTU/h
Propane 13,300 – 199,900 BTU/h

Operating Cost Comparison

System Usage Annual Cost
Navien Tankless 177.0 therms $247
Other Tankless 228 therms $319
189 L Tank 293 therms $409

Specifications

Heat Capacity (NG) 13,300 – 199,900 BTU/h
Heat Capacity (LP) 13,300 – 199,900 BTU/h
UEF 0.96
Flow Rate 19°C Rise 42.4 l/m (11.2 GPM)
Flow Rate 25°C Rise 32.9 l/m (8.7 GPM)
Flow Rate 37°C Rise 22 l/m (5.8 GPM)
Dimensions 43.9cm W x 69.6cm H x 33.5cm D
Weight 33.1 kg (73 lbs)
Installation Indoor or outdoor wall-hung
Venting Forced draft direct-vent
Ignition Electronic ignition
Water Pressure 1.05-10.55 kg/cm² (15-150 PSI)
NG Supply Pressure 3.5 WC to 10.5 WC
LP Supply Pressure 8 WC to 13 WC
NG Manifold Pressure -0.03 WC to -0.96 WC
LP Manifold Pressure -0.02 WC to -0.96 WC
Minimum Flow Rate 1.9 l/m (0.5 GPM)
Cold Water Inlet 3/4 NPT
Hot Water Outlet 3/4 NPT
Gas Inlet 3/4 NPT
Power Supply 120V AC, 60 Hz
Max Power 200 W, 350 W w/ external pump
Materials Cold rolled carbon steel casing; stainless steel primary & secondary heat exchangers
Venting Options PVC, CPVC, polypropylene, stainless steel, 2 or 3 inch
Vent Clearances 0 to combustibles
High Elevation Rating Up to 10,100 ft
Safety Devices Flame rod, APS, ignition detector, temp limit switches, exhaust temp sensor, surge fuse, burner limit fuse, VID

Navien reserves the right to change specifications at any time without notice.

Leave a Reply

Your email address will not be published. Required fields are marked *